'33 Ford
Cool Traditional Hot Rod Pick-Up
A real titled '33 on '33 rails - 5in chop, 3in channel, bed is bobed 14in with 350/glide on all Ford parts. '46 front hubs on '35 front end hung on A spring and cross member with '46 rear end all fresh parts.

'28 Ford Roadster
Open Air!
1928 Model A Metal Ford on original frame with '39 Ford axles, 327, 3-speed and a '50 ford dash, just in time for Spring!

$CALL

'35 Ford Pickup
Bad to the Bone!
Droped six inches in the suspension with 46 Ford axles, a 29 model A front cross member and radiator, 35 car grill and 5 inches of channel in the front of the cab and 3 inches in the rear of the cab. adding a 327 4bbl to the original 3 speed top loader.

$SOLD SOLD SOLD$

'32 Ford Tudor Sedan
4" Chop Rolling Hotrod
Henry Ford tudor sedan with four inch chop, 58 Ford ribbed roof skin and lower patch panels tubs. Car has original fire wall dash and title and is on a new boxed and Xed 32 rail with four in dropped I beam and 40 Ford spindles hubs brakes and 40 Ford rearend. For more info call HilbilyHotrodz.com at 308.473.3020

$CALL NOW

Email for more info and pics oldtinrodz@atcjet.net

'38 Ford Coupe
Great Project Car
Nice old 1938 Ford sedan for hotrod or street rod project. Rolling with clear title. Good start on nice, rare hotrod.

$CALL

Email for more info and pics oldtinrodz@atcjet.net

'50 Merc
Fordor Sedan
1950 Merc fordor with no motor and nice sheet metal, floors for rat rod hotrod custom project.

$CALL

Email for more info and pics oldtinrodz@atcjet.net

*SOLD*
1928 Ford Model A
Tudor Sedan - Gasser Dragster, Hot Rod

Sixties style street strip car with all new compoments and lots of chop channel and shortening. Nice body chopped five with a fill from a 62 Ford wagon, channeled four, shortened four in the quarter window, the wheel wells are raised 5 and tubbed to the sub rails and the fire wall has been shaved off one inch and smoothed. Frame is the original A rail boxed with a seven inch rear kick made of two by three square tube and three inch round tube cross members front and rear all three sixteenth thick. Front end is six inch drop tube on reverse eye A spring with hairpins and friction shocks ,40 Ford spindles, hubs, brakes and Speedway perch and all is new. Rear end is eight inch Maverick with 4.10 and spool on 35 Ford spring and 35 Ford crossmember hanging on hairpin style ladder bars and a panhard bar and all is new but spring. The front Firestones and wheels and back wheels are new and the rear slicks are a nice set of old Firestone drag 500s with new drag tubes. The engine is set back five inches and is a fresh four bolt 350 with .510 lift cam and old polished tunnel ram with 600 holleys, Cal Custom valvecovers, and polish scoop. Fresh turbo 350 with shift modes and a 3000 stall converter and B&M prostick. Fuel system is a 12 gallon race cell with Holley fuel pump and steel lines and everything is NHRA approved accept the red fuel lines on the carbs. New Walker radiator and new grill shell, headlights and 39 tail lights are new and all new wiring with GM color code, new fuse block, switches including dimmer and brake light and gauges. New Speedway brake pedal under floor, Speedway throttle linkage and saginaw steering.

$SOLD

Click for current Ebay listing

'27 T Altered Drag Car
TCI chassis
1927 T altered drag car with TCI chassis Four link six in drop Bell front with magnesium spindle mount bone spoke front wheels and Mustang steering box. Rear end is narrowed solid mount nine inch Ford with full spool, 4.56 gears, MW 35 spline three bolt pattern axles bearings flanges and single disc on pinnion with 16 in by 15 in wide Hildbrand mags, three bolt pattern, and36 by 18 GoodYear Eagle slicks. Built for Chevy engine tranny with tombstone water tank upfront and two gallon Moon cell behind seat. The car drives good and has been around since the seventies. For more info call Hilbily Hotrodz at 308 473 3020.

$5,500

Email for more info and pics oldtinrodz@atcjet.net